CAL3K POWER SUPPLY (3K-1-062)

Part No: 3K-1-062

Quantity: 1 Unit

Compatibility: CAL3K-AP / CAL3K-A

Application: Power Supply for the calorimeter.

MAINS CABLE 220V (3K-1-122)

Part No: 3K-1-122

Quantity: 1 Unit

Compatibility: CAL3K-AP / CAL3K-A

Application: Mains cable for the connection to the power supply for the calorimeter.

BALANCE CABLE (3K-1-117)

Part No: 3K-1-117

Quantity: 1 Unit

Compatibility: CAL3K-AP / CAL3K-A / CAL3K-F / CAL3K-S / CAL3K-ST

Application: Balance cable to interface between the calorimeter to the balance.

PC CABLE (USB) (3K-1-084)

Part No: 3K-1-084

Quantity: 1 Unit

Compatibility: CAL3K-AP / CAL3K-A / CAL3K-F

Application: PC Cable to interface between the calorimeter and PC/Laptop.

PC KEYBOARD (PS2) (3K-1-061)

Part No: 3K-1-061

Quantity: 1 Unit

Compatibility: CAL3K-AP / CAL3K-A / CAL3K-F / CAL3K-S / CAL3K-ST

Application: Keyboard to connect to the calorimeter. Used to enter keyboard commands on the calorimeter.

PREPARATION STAND (3K-4-049)

Part No: 3K-4-049

Quantity: 1 Unit (sold separately), 2 Units (Per Kit)

Compatibility: CAL3K-AP / CAL3K-A / CAL3K-F / CAL3K-S / CAL3K-ST

Application: Used to hold the vessel lid assembly while preparing samples.

CRUCIBLE COVER DISCS (CAL2K-FLDS)

Part No: CAL2K-FLDS

Quantity: 10 Sheets Per Pack

Compatibility: CAL3K-AP / CAL3K-A / CAL3K-F / CAL3K-S / CAL3K-ST

Application: To cover the crucible during firing of combustible substances i.e. volatile fuel and oil.

GELATIN CAPSULES (3K-4-068)

Part No: 3K-4-068

Quantity: 100 Per Pack

Compatibility: CAL3K-AP / CAL3K-A / CAL3K-F / CAL3K-S / CAL3K-ST

Application: Holds samples in the crucible during firing to prevent splattering, i.e. fine powder samples, sawdust, etc.

STAINLESS STEEL TWEEZERS (3K-1-081)

Part No: 3K-1-081

Quantity: 1 Unit

Compatibility: CAL3K-AP / CAL3K-A / CAL3K-F / CAL3K-S / CAL3K-ST

Application: Used to prepare/handle samples. Used to place a sample in the crucible.

CERTIFIED BENZOIC ACID TABLETS (3K-4-084)

Part No: 3K-4-084

Quantity: 150 x 0.5g tablets per bottle (sold separately), 1 x bottle (per kit)

Compatibility: CAL3K-AP / CAL3K-A / CAL3K-F / CAL3K-S / CAL3K-ST

Application: Used to calibrate the calorimeter and to perform a "clean burn" to clean the vessel of residue.

HIGH PRESSURE OXYGEN PIPE 4MM (3.75M) (CLEAR) (3K-3-27)

Part No: 3K-3-27

Quantity: 1 Unit

Compatibility: CAL3K-AP / Filling Station (3K-3)

Application: Used to connect the oxygen to the CAL3K-AP Calorimeter, or to connect the oxygen supply to the external Filling Station.

EXHAUST PIPE 6MM (CLEAR) (3K-6-012)

Part No: 3K-6-012

Quantity: 1 Unit

Compatibility: CAL3K-AP

Application: To remove the exhaust gasses when the vessel deflates after firing.

OXYGEN REGULATOR CONNECTION STANDARD - QUICK FIT (3K-3-21)

Part No: 3K-3-21

Quantity: 1 Unit

Compatibility: CAL3K-AP / Filling Station (3K-3)

Application: To fit the oxygen pipe to the oxygen tank.

CALORIMETER O-RINGS (3K-1-080)

Part No: 3K-1-080

Quantity: 1 Packet of 5 (Per Kit), Singles (Sold Separately)

Compatibility: CAL3K-AP

Application: 3K-AP Nozzle O-ring

SILICONE GREASE TUBE (3K-1-086)

Part No: 3K-1-086

Quantity: 1 Unit

Compatibility: CAL3K-AP / CAL3K-A / CAL3K-F / CAL3K-S / CAL3K-ST / Filling Station (3K-3)

Application: Silicone lubricant grease for o-rings on all calorimeter systems and the Filling Station.

CENTER ELECTRODE (3K-4-036)

Part No: 3K-4-036

Quantity: 1 Unit

Compatibility: 3K-5 Vessel

Application: Used to ignite the sample in the bayonet vessel.

CENTER ELECTRODE (THREAD VESSEL) (3K-4-096)

Part No: 3K-4-096

Quantity: 1 Unit

Compatibility: CAL2K Vessel / 3K-5S Vessel

Application: Used to hold the firing wire to ignite the sample and is held in place by a valve screw..

VESSEL NOZZLE O-RING (3K-4-023)

Part No: 3K-4-023

Quantity: 2 O-Rings (Per Kit), Singles (Sold Separately)

Compatibility: 3K-5 Vessel

Application: To prevent the leaking of oxygen from the bayonet vessel.

OUTSIDE ELECTRODE (3K-4-037)

Part No: 3K-4-037

Quantity: Singles (Sold Separately)

Compatibility: 3K-4 Vessel / 3K-5 Vessel / 3K-5S Vessel

Application: The outside electrode with a sleeve is used to hold the crucible with sample inside the vessel. The outside electrode is shaped with a hook which holds the crucible, suspending it inside the bomb vessel.

CRUCIBLES (3K-4-047)

Part No: 3K-4-047

Quantity: 2 Units (Per Kit), Singles (Sold Separately)

Compatibility: CAL3K-AP / CAL3K-A / CAL3K-F / CAL3K-S / CAL3K-ST

Application: Used to hold the sample in the CAL3K Vessel.

DEFLECTOR PLATE (3K-4-005)

Part No: 3K-4-005

Quantity: 2 Units (Per Kit), Singles (Sold Separately)

Compatibility: 3K-4 Vessel / 3K-5 Vessel

Application: To deflect the heat of combustion inside the bayonet vessel.

FIRING WIRE (3K-4-093)

Part No: 3K-4-093

Quantity: 1 Packet of 5 wires (Per Kit & Sold Separately)

Compatibility: CAL3K-AP / CAL3K-A / CAL3K-F / CAL3K-S / CAL3K-ST / 3K-4 Vessel / 3K-5 Vessel / 3K-5S Vessel / 4K-4 Thread Type Vessel

Application: Used to ignite the sample in the CAL3K Thread Vessel.

FIRING COTTON (3K-4-065)

Part No: 3K-4-065

Quantity: 1 Packet of 200 threads (Per Kit), 1 Packet of 100 threads (Sold Separately)

Compatibility: CAL3K-AP / CAL3K-A / CAL3K-F / CAL3K-S / CAL3K-ST / 3K-4 Vessel / 3K-5 Vessel / 3K-5S Vessel / 4K-4 Vessel

Application: Used to ignite the sample in the CAL3K Bayonet & Thread Vessel.

LID O-RINGS (3K-4-016)

Part No: 3K-4-016

Quantity: 1 Packet of 5 (Per Kit), Singles (Sold Separately)

Compatibility: 3K-4 Vessel / 3K-5 Vessel

Application: To seal the bayonet vessel during a determination.

DEFILLER CAP (3K-3-22)

Part No: 3K-3-22

Quantity: 1 Unit

Compatibility: 3K-5 Vessel / 3K-5S Vessel / 4K-4 Vessel

Application: Used to release the oxygen from the manual filling bayonet and thread vessels after a determination.

TOP & BOTTOM O-RINGS (3K-4-022)

Part No: 3K-4-022

Quantity: 1 Unit

Compatibility: 3K-5 Vessel / 3K-5S Vessel / 4K-4 Vessel

Application: To seal the bayonet and thread vessel during a determination.

EXTERNAL POWER SUPPLY (3K-1-055)

Part No: 3K-1-055

Quantity: 1 Unit

Compatibility: CAL3K-F / CAL3K-S / CAL3K-ST / 3K-2 Air Cooler

Application: The Power Supply is the connection from the calorimeter to the power mains plug (electrical wall socket).

COMPUTER CABLE (3K-1-131)

Part No: 3K-1-131

Quantity: 1 Unit

Compatibility: CAL3K-S / CAL3K-ST

Can also be used: CAL3K-AP / CAL3K-A / CAL3K-F

Application: Connects the calorimeter system to the PC.

VESSEL SPANNER (3K-4-072)

Part No: 3K-4-072

Quantity: 1 Unit

Compatibility: 3K-5 Bayonet Vessel

Application: To use on the 3K-5 Vessel only

WIRE BRUSH (3K-4-106)

Part No: 3K-4-106

Quantity: 1 Unit

Compatibility: 3K-5S and 4K-4 Thread vessel

Application: Used to clean the threads on the vessel cap and the threads on the inside of the vessel body.

PRINTER CABLE (3K-1-098)

Part No: 3K-1-098

Quantity: 1 Unit

Compatibility: CAL3K-AP / CAL3K-A / CAL3K-F / CAL3K-S / CAL3K-ST

Application: Used to connect a printer to the calorimeter system

NOZZLE O-RING USED IN DEFILLER CAP AND FILLING STATION (3K-3-29)

Part No: 3K-3-29

Quantity: 1 Unit. Set of 10s/100s can be ordered if needed.

Compatibility: 3K-3 Filling Station / Defiller Cap( )

Application: Fitted in the nozzle of the Filling Station, where the Lid Assembly will be attached to for filling with oxygen.

EMERGENCY DEFLATE CAP (3K-3-18)

Part No: 3K-3-18

Quantity: 1 Unit

Compatibility: 3K-5 Vessel / 3K-5S Vessel / 4K-4 Vessel

Application: This will remove all the oxygen from the bomb vessel, to use only in case of an emergency, .

CENTER ELECTRODE TOP ONLY (3K-4-046)

Part No: 3K-4-046

Quantity: 1 Unit

Compatibility: 3K-5 Bayonet Vessel

Application: The center electrode is used in the complete lid assembly.

DEFLECTOR PLATE (3K-4-092)

Part No: 3K-4-092

Quantity: 2 Units (Per Kit), Singles (Sold Separately)

Compatibility: 3K-5S Vessel / 4K-4 Thread Vessel

Application: To deflect the heat of combustion inside the thread vessel.

LARGE LID O-RINGS (3K-4-094)

Part No: 3K-4-094

Quantity: 1 Packet of 5 (Per Kit), Singles (Sold Separately)

Compatibility: 3K-5S Vessel / 4K-4 Thread Vessel

Application: Lid o-rings are used in the complete lid assembly.

CENTER ELECTRODE (3K-4-122)

Part No: 3K-4-122

Compatibility: 4K-4 Vessel

Application: Used in the lid assembly and is held in place by a valve screw. .

OUTSIDE ELECTRODE (3K-4-124)

Part No: 3K-4-124

Quantity: 1 Unit

Compatibility: 4K-4 Oxygen Bomb Vessel

Application: Used to ignite the sample in the all vessels.