The CAL3K-F Bomb Calorimeter Installation Kit includes : Power Supply (3K-1-055), Balance Cable (3K-1-117), PC Cable USB (3K-1-084), PC Keyboard PS2 (3K-1-061), Preparation Stand (3K-4-049), Stainless Steel Tweezers (3K-1-081), Certified Benzoic Acid Tablets (150 x 0.5g tablets per bottle) (3K-4-084), Wire Brush (3K-4-106), Emergency deflate cap (3K-3-18), USB including manuals and software (3K-1-043) and printed installation guide (3K-1-INSTALLATION).

The CAL3K Air Cooler Installation Kit includes : Power Supply (3K-1-055).

The CAL3K-F 4K-4 Thread Type Bomb Vessel Installation Kit includes : Centre Electrode (3K-4-096), Outside Electrode M3 (3K-4-037), Crucibles (3K-4-047), Deflector Plate (3K-4-092), Firing Wire (1 packet of 5 wires) (3K-4-093), Firing Cotton Packet (1 packet of 200 threads) (3K-4-065), Lid O-Rings (1 packet of 5) (3K-4-094), Top & Bottom O-Rings (1 packet of 10) (3K-4-022).

The CAL3K Filling Station Installation Kit includes : Nozzle O-Rings used in defiller cap & filling station (1 packet of 5) (3K-3-29), 1 x High Pressure Pipe 4mm (3.75m, Clear) (PIPE_4MM_CLEAR), 1 x Oxygen Regulator Connection (3K-3-21) and 1 x Defiller Cap (3K-4-22), Allen Key (3K-3-32) and O-Ring Lubrication grease tube (3K-1-086).

The following accessories can be added to the CAL3K-A Oxygen Bomb Calorimeter (or purchased separately) :

• Cover Discs for Crucibles for fuel samples (1 sheet of 35 discs) – CAL2K-FLDS
• Gelatine Capsules for powdery samples (1 packet of 100) – 3K-4-068
• Complete Pellet Press Die Set for pressing samples into pellets – 3K-7-41
• Arbor Press for use with Pellet Press Die set – 3K-7-42
• Analytical Balance – FA1004N_BALANCE_INTERNAL
• High Pressure Oxygen Regulator – OXY_REG_SNG