CAL3K-ST COMPLETE KIT
The CAL3K-ST Bomb Calorimeter Installation Kit includes:
- Power Supply (3K-1-055)
- PC Keyboard PS2 (3K-1-061)
- Preparation Stand (3K-4-049)
- Stainless Steel Tweezers (3K-1-081)
- Certified Benzoic Acid Tablets (150 x 0.5g tablets per box) (3K-4-125)
- Wire Brush (3K-4-106)
- Emergency deflate cap (3K-3-18)
- Computer Cable (3K-1-131)
- USB including manuals and software (3K-1-043)
- Printed installation guide (3K-1-INSTALLATION)
The CAL3K-ST 4K-4 Thread Type Bomb Vessel Installation Kit includes:
- Centre Electrode (3K-4-122)
- Outside Electrode M3 (3K-4-124)
- Crucibles (3K-4-047)
- Deflector Plate (3K-4-092)
- Firing Wire (1 packet of 5 wires) (3K-4-093)
- Firing Cotton Packet (1 packet of 200 threads) (3K-4-065)
- Lid O-Rings (1 packet of 5) (3K-4-094)
- Top & Bottom O-Rings (1 packet of 10) (3K-4-022)
The CAL3K Filling Station Installation Kit includes:
- Nozzle O-Rings used in defiller cap & filling station (1 packet of 5) (3K-3-29)
- 1 x High Pressure Pipe 4mm (3.75m, Clear) (3K-3-27)
- 1 x Oxygen Regulator Connection (3K-3-21)
- 1 x Defiller Cap (3K-3-22)
- Allen Key (3K-3-32)
- O-Ring Lubrication grease tube (3K-1-086)
- 2 x Nozzle O-rings (3K-1-080)
The following accessories can be added to the CAL3K-ST Oxygen Bomb Calorimeter (or purchased separately):
- Cover Discs for Crucibles for fuel samples (1 sheet of 35 discs) (CAL2K-FLDS)
- Gelatin Capsules for powdery samples (1 packet of 100) (3K-4-068)
- Balance Cable (3K-1-117)
- RS232 Printer Cable (3K-1-098)
- Complete Pellet Press Die Set for pressing samples into pellets (3K-7-41)
- Arbor Press for use with Pellet Press Die set (3K-7-42)
- Analytical Balance (FA1004N_BALANCE_INTERNAL)
- High Pressure Oxygen Regulator (OXY_REG_SNG)
- Serial Printer (SERIAL_PRINTER)
