The CAL3K-A Bomb Calorimeter Installation Kit includes:

• Power Supply (3K-1-062)
• Mains Cable 220V (3K-1-122)
• Balance Cable (3K-1-117)
• PC Cable USB (3K-1-084)
• PC Keyboard PS2 (3K-1-061)
• Preparation Stand (3K-4-049)
• Stainless Steel Tweezers (3K-1-081)
• Certified Benzoic Acid Tablets (150 x 0.5g tablets per box) (3K-4-125)
• Emergency deflate cap (3K-3-18)
• Wire Brush (3K-4-106)
• Printer Cable (3K-1-098)
• USB including manuals and software (3K-1-043) and printed installation guide (3K-1-INST)

The CAL3K Filling Station Installation Kit includes:

• Nozzle O-Rings used in defiller cap & filling station (1 packet of 5) (3K-3-29)
• 1 x High Pressure Pipe 4mm (3.75m, Clear) (3K-3-27)
• 1 x Oxygen Regulator Connection (3K-3-21)
• 1 x Defiller Cap (3K-3-22)
• 2 x Nozzle O-rings used in internal piston (1 packet of 2) (3K-1-080)
• Allen Key (3K-3-32)
• O-ring Lubrication Grease (Tube) (3K-1-086)

The following accessories can be added to the CAL3K-A Oxygen Bomb Calorimeter (or purchased separately):

• Cover Discs for Crucibles for fuel samples (1 sheet of 35 discs) (CAL2K-FLDS)
• Gelatin Capsules for powdery samples (1 packet of 100) (3K-4-068)
• Complete Pellet Press Die Set for pressing samples into pellets (3K-7-41)
• Arbor Press for use with Pellet Press Die set (3K-7-42)
• Analytical Balance (FA1004N_BALANCE_INTERNAL)
• High Pressure Oxygen Regulator (OXY_REG_SNG)
• Serial RS232 Printer (SERIAL_PRINTER)

The CAL3K-A 4K-4 Thread Type Bomb Vessel Installation Kit includes:

• Center Electrode (3K-4-122)
• Outside Electrode M3 (3K-4-124)
• Crucibles (3K-4-047)
• Deflector Plate (3K-4-092)
• Firing Wire (1 packet of 5 wires) (3K-4-093)
• Firing Cotton Packet (1 packet of 200 threads) (3K-4-065)
• Lid O-Rings (1 packet of 5) (3K-4-094)
• Top & Bottom O-Rings (1 packet of 10) (3K-4-022)

The CAL3K Air Cooler Installation Kit includes:

• Power Supply (3K-1-055)