CAL3K-AP COMPLETE KIT
The complete calorimeter system is delivered with installation kits for the calorimeter, air cooler and vessels (for approximately 200 firings).
The CAL3K-AP Bomb Calorimeter Installation Kit includes:
- Power Supply (3K-1-062)
- Mains Cable 220V (3K-1-122)
- Balance Cable (3K-1-117)
- PC Cable USB (3K-1-084)
- PC Keyboard PS2 (3K-1-061)
- Preparation Stand (3K-4-049)
- Stainless Steel Tweezers (3K-1-081)
- Certified Benzoic Acid Tablets (150 x 0.5g tablets per box) (3K-4-125)
- 1 x 3K-AP Exhaust Pipe 6mm (4m) (3K-6-012)
- 1 x 3K-AP Exhaust O-Ring (3K-6-031)
- 1 x Oxygen Regulator Connection (3K-3-21)
- 1 x High Pressure Oxygen Pipe 4mm (3.75m, Clear) (3K-3-27)
- 3K-AP Nozzle O-rings used in internal piston (1 packet of 2) (3K-1-080)
- Nozzle O-rings (green) used in internal piston (1 packet of 1) (3K-4-107)
- 1 x 3K-AP Filling Nut (3K-6-018)
- 1 x Inflation Nipple (3K-4-039)
- 1 x Tube of Lubrication Grease (3K-1-086)
- 1 x 3K-AP Filling Head O-Ring (3K-6-025)
- 1 x 4mm Compression fitting with ferrule (3K-6-033)
- 1 x 3K-AP Emergency Deflate Cap (3K-3-18)
- 1 x 3K-AP Pressure Leak Test Jig (3K-1-115)
- Exhaust Filter O-ring (3K-6-005)
- Wire Brush (3K-4-106)
- Printer Cable (3K-1-098)
- USB including manuals and software (3K-1-043) and printed installation guide (3K-1-INST)
The following accessories can be added to the CAL3K-AP Oxygen Bomb Calorimeter (or purchased separately):
- Cover Discs for Crucibles for fuel samples (1 sheet of 35 discs) – CAL2K-FLDS
- Gelatin Capsules for powdery samples (1 packet of 100) – 3K-4-068
- Complete Pellet Press Die Set for pressing samples into pellets – 3K-7-41
- Arbor Press for use with Pellet Press Die set – 3K-7-42
- Analytical Balance – FA1004N_BALANCE_INTERNAL
- High Pressure Oxygen Regulator – OXY_REG_SNG
- Serial RS232 Printer (SERIAL_PRINTER)
The CAL3K-AP 4K-4 Thread Type Bomb Vessel Installation Kit includes:
- Centre Electrode (3K-4-122)
- Outside Electrode M3 (3K-4-124)
- Crucibles (3K-4-047)
- Deflector Plate (3K-4-092)
- Firing Wire (1 packet of 5 wires) (3K-4-093)
- Firing Cotton Packet (1 packet of 200 threads)(3K-4-065)
- Lid O-Rings (1 packet of 5) (3K-4-094)
- Top & Bottom O-rings (1 packet of 10) (3K-4-022)
The CAL3K Air Cooler Installation Kit includes:
